Poor power factor
Power system analysis
PQube 3, QubeScan, PowerVar Hybrid Capacitor Bank
An aluminum extrusion manufacturer was facing power efficiency issues — and steep utility penalties to match. With a poor power factor of .79, they were far below their utility requirement of .95. Penalties upwards of $20,000 per month began to stack up.
Despite having power factor correction equipment on site, the issue persisted. What was going on? The company needed to get to the root of why their power factor was so low and get a clearer picture of their load profile within their defective equipment.
They turned to Powerside for help.
To better understand the load profile of the aluminum extrusion process, Powerside ran a full Power System Analysis. This comprehensive service was completed in three easy steps:
The Power System Analysis detected and determined that the manufacturer’s existing power factor correction equipment was not adequately compensating for the extrusion process’s repetitive and rapid load changes. This dynamic load profile led Powerside to develop a unique, custom solution.
Powerside modified multiple PowerVar Capacitor Banks, including a 1,000 kVAR bank with 800 kVAR of contactor switching and two thyristor-switched stages. The thyristors respond in as few as three 60 Hz cycles to match the rapid load changes of the aluminum extrusion process, while the contactor handles stable loads. To prevent harmonic resonance, the system includes detuned reactors in series with the capacitors, transforming it into a shunt filter. This design avoids amplifying harmonics, ultimately ensuring system stability.
Check out a detailed video explaining the process here.
The capacitor bank has replaced the patchwork of failing corrections equipment the company had previously relied on. It now seamlessly handles the extrusion process’s cyclical demands, eliminating resonance issues, avoiding harmonic amplification, and wiping out a hefty monthly penalty.
Even more transformative, the PQube 3 power analyzer and QubeScan monitoring platform have become the backbone of their power system. Now embedded into the correction solution itself, the PQube 3 automatically alarms to issues like blown fuses or undercompensation. The system keeps disturbances in check and power factor within compliance — no expert maintenance team required.
Detect and correct the power quality issues plaguing your business. Request a Power System Analysis today.
